Tutorial for using 9worker.gz raw VM image Walkthrough done with Qemu in Debian Wheezy commands shown are executed inside the vm except where shown as
[HOST] wget http://9gridchan.org/9worker.gz [HOST] gunzip 9worker.gz
When launching the qemu 9queen fileserver, you may wish to increase the default memory slightly from 128m to 256m. For convenience we will be specifying drives using -hda and -hdb.This is usually slow. You probably want to specify drives differently. The following example is for hda(drive 1), change index=0 to index=1 for hdb(drive 2). More info on setup can be found at the setup page.
[HOST] qemu -drive file=9worker,media=disk,index=0,cache=writeback
using 9worker standalone — boot option 1
[HOST] qemu -hda 9worker -net nic -net user,hostfwd=tcp::17060-:17060
Choose option 1, the default, at the boot menu, then at the prompt type
Now you can work in the rootless environment.
To give a window access to the full distribution, use the command
Then look at the ns of that window. You can use any binary from the full distribution. This is just a demonstration, please don't place a lot of unneeded load on sources by making it your root frequently with this method. We can use this namespace alteration to demonstrate namespace modifications via /proc.
Open three windows. In the first, do
echo $pid addsources
In the second, just echo $pid to find it's pid. Then from the third window:
cpns -t -r sourcespid otherpid cpns -r sourcespid otherpid
Now check out the namespace of second window. It has become a copy of the process in the first window.
Hubfs shells in grio
The modified version of rio "grio" has new menu options. Use the "Hub" menu option to sweep out a new window in the same way as with New. Enter some commands in this shell, then delete the window. (Do not type exit in the shell.) Now open another window with the Hub option. You are connected to the same shell. This is hubfs which uses 9p to multiplex pipelike files. It can be used like screen/tmux.
Drawterm in to the mini-cpu server
[HOST] drawterm -a dead.ip -c 'tcp!your.local.ip.address!17060' -u glenda
When prompted for a password enter
After a moment, you should be inside the mini-cpu server environment. Look around in /bin to see what can be done with just the worker alone. You may notice that the Hub menu doesn't connect to the same shells as before. Look in /srv and you will see both /srv/hubfs and /srv/riohubfs.glenda. By choosing which is mounted at /n/hubfs, you can start a new sub-rio connected to whichever io hubs you wish. This feature will be used more in the demos with multiple systems.
using 9worker with a 9front live cd — boot option 2
(Note that the Bell Labs .iso works the same way for this, other than one command flag as noted below.)
[HOST] qemu -hda 9worker -cdrom 9front-*iso -net nic -net user,hostfwd=tcp::17060-:17060
hit enter twice to accept defaults at prompts The boot process will put you inside a live cd environment. To get to the independent controlling namespace, cpu or drawterm in.
[HOST] drawterm -a 192.168.244.244 -c 'tcp!your.local.ip.address!17060' -u glenda
(for drawterm as hostowner you can use a meaningless ip address)
From inside drawterm explore the basic rootless environment. One thing to do is sweep out a new window using the Hub menu to start a new shell. Type ns and some other commands. You can connect to the same hub again using the same menu item.
To connect to 9front cd namespace
rerootwin -f boot service=con . $home/lib/profile grio -s
If you are using the Bell Labs .iso rather than 9front, just remove the -f flag from the rerootwin command in the above example.
You have now rerooted into the 9front namespace within the service namespace. If you use the Hub menu now to make a new window you will be back in the hubfs ns. The different namespaces between the cd environment and the rootless environment provide a good opportunity to test cpns between different processes.
Using 9worker and 9queen together — 2 nodes Example setup given using a completely fresh install from bell labs iso (This shows how to create the worker and queen images. If you download the preinstalled images, you can skip the first two steps.)
[HOST] qemu-img create -f raw 9queen 2G [HOST] qemu-img create -f raw 9worker 16m [HOST] qemu -hda 9queen -hdb 9worker -cdrom plan9.iso
Install plan 9 from the .iso and then reboot and now inside
DNSSERVER=22.214.171.124 ip/ipconfig ndb/cs ndb/dns -r mkdir ants 9fs sources dircp /n/sources/contrib/mycroftiv/rootlessnext ants cd ants build isoinstall build worker cd cfg stockmod fshalt
(This is the exact process by which the two images were created.) Now we are ready to use both together
[HOST] qemu -hda 9queen -net nic -net user,hostfwd=tcp::2564-:564,hostfwd=tcp::17007-:17007,hostfwd=tcp::17020-:17020 [HOST] qemu -hda 9worker -net nic -net user,hostfwd=tcp::2567-:567,hostfwd=tcp::17010-:17010,hostfwd=tcp::17060-:17060
Note that these port redirections assume you are making use of another layer of port redirection with iptables to avoid the annoying UNIX "privileged ports" issue. For more information and examples, the wiki page installing plan 9 on qemu has details.
choose option 2 on 9queen boot (cpu server) choose option 3 on 9worker boot and then choose tcp enter tcp boot ips of 9queen (your local machine ip probably)
[HOST] drawterm -a localhost -c localhost -u glenda echo '' >>/lib/ndb/local echo 'ip=your.local.ip sys=filesrv authdom=rootless auth=helix' >>/lib/ndb/local echo -n refresh >/net/cs import -c filesrv /srv /n/fsrv mount -c /n/fsrv/hubfs /n/hubfs grio -s -c 0x999999
Now you can work in a normal cpu root but your hubfs menu has persistent access to the service namespace on the fileserver.
Access the service namespace on the tcp cpu
[HOST] drawterm -a localhost -c 'tcp!localhost!17060' -u glenda
Access the service namespace on the file server
[HOST] drawterm -a localhost -c 'tcp!localhost!17020' -u glenda
This environment with two machines is also good for testing rerootwin, cpns of remote processes, and many other aspects of ANTS not covered in this brief tutorial.
Complex ANTS usage demo: 2 nodes, 5 namespaces
This example makes use of the previously configured two nodes, and then the Bell Labs and the 9front live cds. We will make namespaces available rooted to disk and both cds as well as the service namespaces on each node, then we will connect shells from each namespace to a shared hubfs available in each environment. It will also show rewriting of the namespace of remote processes and rerooting to namespaces on remote hosts. Learn more about the colony in tutorial2.